Fusion Splice Protection Sleeve

Fusion splice protection sleeves are offered with stainless steel rod for single fiber or ceramic component as strength member for ribbon fiber at 45mm or 60mm standard length or customized.
Fusion splice protection sleeves provide mechanical reinforcement at joint port and maintain the optic transmission properties of the fiber cable, offer good protection from mechanical damage, pollution, and weather conditions


splice protection sleeves

Fusion Splice Protection Sleeve Features
–Providing protection for fused junction between two spliced optical fibers as a substitute for the original fiber cable jacket.
–Providing a degree of rigidity preventing the spliced area from bending or flexing.
–Consist of cross linked polyolefin, hot fusion tubing and stainless reinforced steel rod or with ceramic rod, quartz rod
–Different color can be available , clear is standard
–Single fiber and Ribbon Fiber protection sleeve available
–Working Temperature:-45~110 degree
–Shrinking temperature range: 120 degree
–Quality level upto TYCO SMOUV or economical quality for option

Technical Details:

Properties Test Method Typical Data
Tensile Strength(MPa) ASTM D 2671 ≥18 Mpa
Ultimate Elongation (%) ASTM D 2671 700%
Density (g/cm2) ISO R1183D 0.94 g/cm2
Dielectric Strength (KV/mm) IEC 243 20KV/mm
Dielectric Constant IEC 243 2.5max
Longitudinal Change (%) ASTM D 2671 ±5%

Other Products

Contact Us

Share Us