KL-280G FUSION SPLICER

KL-280G FUSION SPLICER Features:
–Core to core alignment by PAS technology(PAS: Profile Alignment System)
–Fiber core can be display clearly
–Single X or Y view and X & Y view simultaneously
–Auto check quality of cleaved end face
–5.7 inch TFT color LCD monitor with clear digital image display
–USB & VGA interface
–Software upgrade via USB interface

 


KL-280G FUSION SPLICER

Technical Details:
–Applicable fiber: SM, MM, DS, NZDS
–Fiber cleaved length:8-16mm (Coating diameter:250μm)
–Fiber count:Single
–Return loss:>60dB
–Splicing mode:Auto Calibrate Normal Special
–Splicing program:53 (templet), 40(user)
–Protection sleeve length: 60mm, 40mm
–Tube heating program:9 (templet),24(user)
–Tension test:2N
–Fiber Diameter:Cladding diameter:80-150μm;Coating diameter:100-1000μm
–Fiber aligning method: Meticulous;Core;Clad;Manual
–Actual average splice loss:0.02dB(SM),0.01dB(MM),0.04dB(DS),0.04dB(NZDS)
–Typical splicing time:9 sec (standard SM fiber)
–Tube typical heating time:30 sec
–Storage of splice result:4000 results, 20 parameter per result
–Fiber image magnification: 300X (X or Y view),150X(X and Y view)
–Battery capacity:Typical 150 cycles (splice/tube heat with inner Li-battery)
–Monitor:5.7 inch TFT color LCD monitor
–Electrode life:2500
–Terminal:USB and VGA
–Operating condition:0-5000m above sea level, -10-50°,Max wind velocity of 15m/s
–Power supply:AC 100-240V with AC adapter,inner Li-battery (7800mAH)
–Dimension:150mm(L)×150mm(W)×150mm(H)
–Weight:2.7Kg excluding battery, 3.3Kg including battery

Standard Configuration: main fusion machine, P.S cord, Electrodes, Manual, Cooling tray, Case

Other Products

Contact Us

Share Us