10/100/1000 Media Converter

10/100/1000Base-TX to 1000Base-FX Media Converter including managed and unmanaged mediates between a 10/100/1000Base-TX segment and 1000Base-Fx segment..
The media converter transforms the transmission media of Ethernet signal from CAT5 100m to optical fiber 850/1310/1550nm. It can extend the transmission distance to several kilometers or hundred kilometers. it is primarily designed for large, higher speed/bandwidth demanding work groups that require expansion of the Ethernet network.
New 0.25µm technology to improve the performance and to avoid the packet lost with long the transmission. It also reduce the delay time to less than 9.6 µs.


10-100-1000 media coverter

Feature:
–Provide fiber connector and UTP connector
–Fully complies with IEEE802.3, IEEE802.3u,IEEE802.3Z IEEE802.3x ,1000Base-FX
–Auto-detection of half/full duplex transfer mode for TX port
–Auto-negotiation of 10/100/1000Mbpa rate and Auto-MDI/MDIX for TX port
–Provide switch configuration of half/full duplex transfer mode for FX port
–Extend fiber distance up to 2km for multi-mode fiber and 20-120km for single-mode fiber
–Compacts size for easy installation and working with Media Chassis
–Choice of various number fiber-connector ports from SC, LC,FC, ST and WDM, multi-mode / single-mode fiber for 1000Base interface
–Easy-to-view LED indicators provides status to easily monitor network activity Internal power supply
–1000Base-SX: 50/125ìm or 62.5/125ìm multi-mode fiber cable, up to 220/550m
–1000Base-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters
–Back pressure flow control for full duplex IEEE802.3 X and half duplex.
–Max 2M buffer memory built in chip
–In conformity to safety code of FCC and 15 CLASS B and CE MARK.

Technical parameters
1. Standard Protocol: Comply with IEEE 802.3 10 Base-T standard.
Comply with IEEE 802.3u 100 Base-TX/FX standard.
Comply with IEEE 802.3z 1000 Base-TX/FX standard.
Comply with IEEE 802.3x Flow control standard.
2. Connector: 1 UTP RJ-45 connector, 1 SC/ST connector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter: 90-240Vac, 50/60Hz with outside switching adaptor: 5V DC
built-in: 110-265VAC or 48VDC
power consumption: 4W
5. Environmental temperature: 0~50degree
6. Relative humidity: 5%-90% none-condensing
7. BER < 1E-9
8. TP cable: Cat5 UTP cable 100m
9. Transfer fiber: multi-mode: 50/125, 62.5/125 or 100/140µm
single mode: 8.3/125, 8.7/125, 9/125 or 10/125µm
10. Weight: External power supply 0.4kg
Internal Power supply 0.8kg
Socket Card:1.0kg

 

Other Products

Contact Us

Share Us