Microduct Reducer Connectors
The microduct reducer connectors, used to connect one micro duct to another micro duct with the different diameter, make splicing MicroDuct fast and easy. Simply push the MicroDucts into the center of the coupling. No tools are required.
The coupler can be connected and disconnected 10 times and still maintain the high performance requirements for air blown installation systems.
MicroDuct reducer connector operate at 15 BAR (218 psi) with a maximum permissible leakage rate of 1cc/min. This is equivalent to 1 bubble every 3 seconds. Higher pressures have been used in the field with no increase in leakage rate. Quick Burst rating is 25 BARS (363 psi).
Features
–Connect two microducts which are different outer diameter
–Easy installation without special tools
–Transparent plastic body, easy to observe the situation
–Standard EN50411-2-8
–Internal cone hole to prevent fiber hang up
Material and Performance:
Body Material: PC , impact resistant
Collect Material: POM, stainless steel teeth
O-rings Material: Nitrile rubber
- Blowing Pressure: Between temperatures of -10℃and +60℃, all connectors size can be used for blowing operations at pressures up to 16bar.
- Burst Pressure: >26bar
- Gas Tightness: Leakage at 16 bar gas pressure: 1ml/minute approx.
Leakage at 0.7bar gas pressure: 0.1ml/minute approx.
- Water ingress: The connectors shall seal against a 6m head of water.
- Insertion force: 50N max (5kg)
- Retention force: 25N min (3mm m/d) 55N min (5mm m/d) 125N min (8mm m/d) (collect not held in) 125N min (10mm m/d) 155N min (14mm microduct)
Specification | Duct OD/ID(MM) | Duct OD/ID(MM) | Taper Hole(mm) |
MRC5-3/2.1 | 5/ 3.5 | 3/2.1 | 3.5>2.1 |
MRC5-4/2.5 | 5/ 3.5 | 4/2.8 | 3.5>2.8 |
MRC7-3/2.1 | 7/ 3.5 | 3/2.1 | 5.5>2.1 |
MRC7-4/2.8 | 7/ 5.5 | 4/2.8 | 5.5>2.8 |
MRC7-5/3.5 | 7/ 5.5 | 5/3.5 | 5.5>3.5 |
MRC8-3/2.1 | 8/6 | 3/2.1 | 6>2.1 |
MRC8-5/3.5 | 8/6 | 5/3.5 | 5.5>3.5 |
MRC8-7/3.5 | 8/6 | 7/5.5 | 6>3.5 |
MRC10-5/3.5 | 10/8 | 5/3.5 | 8>3.5 |
MRC10-7/5.5 | 10/8 | 7/5.5 | 8>5.5 |
MRC10-8/6 | 10/8 | 8/6 | 8>6 |
MRC12-5/3.5 | 12/10 | 5/3.5 | 8>3.5 |
MRC12-7/5.5 | 12/10 | 7/5.5 | 8>5.5 |
MRC12-8/6 | 12/10 | 8/6 | 8>6 |
MRC12-10/8 | 12/10 | 10/8 | 10>8 |
MRC12.7-12/10 | 12.7/10 | 12/10 | 12.7>10 |
MRC14-7/3.5 | 14/10 | 7/3.5 | 10>3.5 |
MRC14-10/8 | 14/12 | 10/8 | 12>8 |
MRC14-12/10 | 14/12 | 12/10 | 12>10 |
MRC16-10/8 | 16/13 | 10/8 | 13>8 |
MRC16-12/10 | 16/13 | 12/10 | 13>10 |
MRC16-14/10 | 16/ 13 | 14/10 | 13>10 |
MSC18-14/10 | 18 /14 | 14/10 | 14>10 |
Other Products
-
Fiber Optic Connectors
Fiber optic connectors are critical components for the fiber optic pigtail, patc -
Fiber Optic Adapters
Fiber optic adapters are used for aligning the connectors with high precision zi -
3M Fibrlok Mechanical Splice
The 3M Fibrlok Mechanical Splice universal optical fiber splice is applied in em -
SC Field Installable Connectors
Field installable connectors or fiber optic fast connectors are factory terminat -
IP66 Waterproof LC Connector
IP66 Waterproof PDLC are compatible with original singlemode and multimode LC co -
ODVA Connectors and Assemblies
ODVA one type of sealed fiber connectors with quick connect bayonet coupling mec -
SC Field Installable Connector with Cera
Field installable connectors or fast connectors are factory terminated and polis -
SM Fiber Optic Loopback Cables
Fiber optic loopback is designed for test and engineering. It can provides an ef -
Fiber Optic Keystone Jacks
Fiber optic keystone jacks with snap-in design offers a interchangeable and flex -
MM Fiber Optic Loopback Module
Fiber optic loopback is designed for test and engineering. It can provides an ef -
OM3 Fiber Optic Loopback Module
Fiber optic loopback is designed for test and engineering. It can provides an ef -
SM FIBER OPTIC LOOPBACK MODULE
Fiber optic loopback is designed for test and engineering. It can provides an ef -
LC Field Assembly Optical Connector
The LC Field Assembly Optical Connector are pre-polished from factory with V gro -
Fiber Optic Adapter with Shutter
The fiber optic adapters with shutter are mainly available with LC and SC plast -
FC Fast Fiber Optic Connector
The fast connectors or field assembly optical connector are pre-polished from fa -
Military Tactical Fiber Optic Connector
The military tactical fiber optic connector featured fully sealed hermaphroditic -
LC Switchable HD Uniboot Connector
LC switchable HD uniboot connector is with a single boot and integration design -
LC DUPLEX MINI CONNECTOR
The mini LC connector design is compatible with mini SFP+ tranceivers, providing -
SC Auto Shutter Connector
The SC auto shutter connector, push pull design with sophisticated dust and lase -
Removable Fiber Connector Protective Cap
The protective cap is designed for fiber connector protection during cabling pul -
Fiber Optic Microduct Straight Connector
The microduct straight connectors, used to connect one microduct to another micr -
MPO Stackable Adapter
The MPO stackable adapter is providing a flexible solution for high desnity solu