Optical Fiber Identifier AFI400

Optical fiber identifier AFI400 is an essential installation and maintenance for fiber direction identification through a single mode fiber without disrupting traffic.


optical fiber indentifer AFI400

Optical Fiber Identifier AFI400 Features:
–Support to detect optical signals without disrupting traffic based on non-destructive technology;
–Indicate the signal direction in fiber
–Detect a variety of optical tones, 270Hz, 1kHz and 2kHz
–Suitable for 0.25mm, 0.9mm, 3.0mm fiber, and no need to replace the clamp block, more convenient than others;
–Build in visible fault locator 1mW or 10mW optional
–Battery low indication
–Powered by 2 units of 1.5V AA alkaline batteries

Technical details:

–Wavelength Range: 900 to 1700nm (SM)
–Recognizable signal type : CW, 2kHz, 1kHz, 270Hz ±10%
–Detector Type: InGaAs 2pcs
–Fiber Type: 0.9, 0.25, 3.0 mm fiber
–Sensitivity: 1310 nm +10dB to -20 dBm (Continuous Wave)/ +10dB to -15 dBm (Modulated Signal)
1550 nm +10dB to -30 dBm (Continuous Wave)/+10dB to -25 dBm (Modulated Signal)
–LED Indicator: Signal direction; signal frequency (2kHz/1kHz/270Hz); low battery
–Signal intensity: 0 ~ 40
–Storage Temperature: -20 — +60 ℃, < 90%RH
–Operating Temperature: -10 — +50 ℃, < 90%RH
–Power Supply: AA * 2
–Size: 230mm * 45mm * 45mm
–Weight: About
Note:
— At 20±3℃, indoor, 1550nm wavelength, 0.9mm fiber, with white coat, 270Hz, error < 5%,
— 0.25, 2.0, 3.0mm fiber, the performance at continuous wave <-30dBm
— 1KHz, 2KHz, the performance at modulated signal <-25dBm
— At 1310nm wavelength, the performance at con. wave <-30dBm and at mod. signal <-25dBm

Accessories:
— Standard User’s manual / 1
— Calibration certification / 1
— Pack box / 1

Optional:
–1 mW visual fault locator (AFI420S)
–10 mW visual fault locator (AFI420L)

 

Other Products

Contact Us

Share Us