10/100/1000M POE(PSE) Media Converter

POE Media Converter 10/100/1000Base-TX to 1000Base-FX allows two types of network segment to be connected easily. Complied with IEEE802.3af/IEEE802.3at standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transferred over a fiber optic link with 48V or other voltage power supply, providing power to IEEE802.3af powered device (PD) over up to 100m CAT5 UTP cable.

The PSE controller offering PD signature sending and power monitoring is included in the converter. PoE media converter is also featuring with over-current protection, LFP function which monitors both the fiber and cooper RX port for loss of signal. Different fiber interface at different wavelength are provided.


10-100-1000M POE media converter

POE Media Converter Features:
–10/100/1000Base-TX UTP to 1000Base-FX fiber media conversion
–IEEE802.3at / IEEE802.3af PoE PSE compatible
–Built-in AC/DC power supply
–Over-current protection
–Choice of SC, LC, BiDi or other connectors for multimode and singlemode
–DIP switch to set different configurations
–LFP (Link Fault Pass-through) support

Technical Details:
–Data rates: 10/100/1000Mbps(IEEE802.3U,IEEE802.3z 1000Base-Tx), 1000Mbps (1000Base-FX) or 100Mbps (100Base-FX)
–Power Information:
Input voltage: 100 VAC to 240 VAC
Input frequency: 47 Hz to 63 Hz
For IEEE802.3af standard: 1/2 (V+),3/6 (V-)
For IEEE802.3at standard (30watts maximum): 1/2 (V+),3/6 (V-)
For IEEE802.3at standard (50watts maximum): 1/2/4/5 (V+),3/6/7/8 (V-)
Output Power: 15.4W, 25W, 30W, 50W
Efficiency: 75% min
Short circuit protection: Auto recovery
Over current protection: Auto recovery

–Environmental Conditions:
Operating temperature: 0℃ to 50℃
Cooling: free air convection
Storage temperature: -20℃ to +85℃
Operating Humidity: 90% max, non-condensing

–Connectors: AC Inlet: IEC-J-4, LAN: Shield RJ-45, Fiber: SC, LC, ST, FC
–Mechanical Specifications
Net Weigh: 540g/unit
Dimension: 110x 40×140(W x H x L)mm

Other Products

Contact Us

Share Us